types of quilting feet are supplied as standard accessories
with the machine. A 1/5 Quilting Foot is used for basic quilting
and the 1/4 Quitling Foot for precision sewing with 1/4 inch
feed dog can be raised and lowered simply by depressing a switch.
When quilting, the drop feed allows you to sew curved stitches
its reliable feed, the even feed foot ensures the machine's
ability to produce beautiful seems when sewing difficult-to-feed
fabrics such as georgette and velvet, as well as heavy weight
materials such as leather.
machine is equipped with an automatic thread trimming device
that simultaneously cuts the needle and bobbin threads at the
sewing end by lightly pressing the push-button. It uses the
thread trimming mechanism that is similar to the industrial
sewing machine type.
Pedal Switch for Thread Trimming
with an industrial sewing machine, the thread trimmer can
be activated with the foot pedal switch. It greatly increases
new bobbin case latch and an enlarged bobbin case area make
it easier to remove and replace the bobbin.
push lever automatic needle threader easily threads the needle
without eyestrain and allows you to start sewing quickly.
knee lifter lever allows you to lift / lower the presser foot
without using your hands.
of Presser Foot Pressure
foot pressure can be adjusted according to the fabric being
sewn by turning a regulator located on the top of the machine.
Materials are sewn with Ease
speed control mechanism, operated by microcomputer, allows the
machine to sew material at low speeds. This provides for accurate
feed and perfect stitching when sewing heavy weight fabrics,
quilting and multiple layers of materials.
Stop Position of the Needle
move the needle up or down as desired, simply press the needle
up/down button. When the button is pressed continuously, the
machine sews stitch by stitch at low speed.
of the Presser Foot
Lever Max.9mm, by Knee Lifter Max. 12mm
(130/705H) #7-#18 (HLx5#9-#16)
(W) x 350 (H) x 219 (D) (mm)
Voltage / Power Consumption
/ 1.4A, 100W
Consumption of the Lamp
x 277 (mm)
Manufacturer's Warranties: 90 Days labor in defects in materials and